Description
|
Maximum cut off stock |
||||
|
|
Cutting at angle 90 ° |
mm |
|
500 |
|
|
500 |
|||
|
|
630×500 |
|||
|
Bundle clamping capacity max. |
mm |
|
x |
|
|
Material support height |
mm |
700 |
||
|
Sawband speed |
m/min |
20-120 |
||
|
Sawband dimmensions |
mm |
6650x54x1,3 |
||
|
Stock feeding: |
||||
|
single |
mm |
500 |
||
|
repeatedly |
mm |
limitless |
||
|
Shortest length of residual piece in automatic mode |
mm |
160 |
||
|
Drive power: |
||||
|
Saw motor |
kW |
7,5 |
||
|
Coolant pump |
kW |
0,12 |
||
|
Hydraulic motor |
kW |
0,75 |
||
|
Chip brush |
kW |
0,09 |
||
|
Overall dimensions: |
||||
|
length |
mm |
3950 |
||
|
width |
mm |
2230 |
||
|
height |
mm |
2350 |
||
|
Net weight |
kg |
5400 |
||
Description
The model OL 500/630AP e high efficiency gantry type bandsaw cutting machine designed for straight cutting of solids, pipes and profiles of ferrous and non-ferrous metals.
The model OL 500/630AP is controlled on base of an industrial programmable controller having opportunity for setting of 99 programs containing number of the bars being cut.
The machine OL 500/630AP belongs to the category of fully-automatic machines equipped with a hydraulic system, allowing automation of many working operations (material clamping in the vice, saw bow movement up and down), and a cutting force control. The machine is equipped with a system for automatic tracking both of the feeding speed and the cutting force. At the cutting feed extremely increasing the saw bow slows automatically to its full stop and smoothly increasing up to the set value after the cutting force is normalized.
Saw bow feeding – hydraulically;
Saw bow lifting – hydraulically;
Material feeding – hydraulically;
Material clamping – hydraulically;
Saw blade tensioning – hydraulically;
Cutting length setting – manually;
