Description
| Maximum cut off stock | ||||
| Cutting at angle 90 ° | mm | 420 | ||
| 410 | ||||
| 420×410 | ||||
| Bundle clamping capacity max. | mm | |||
| Material support height | mm | 630 | ||
| Sawband speed | m/min | 15-100 | ||
| Sawband dimmensions | mm | 5300x34x1.1 | ||
| Stock feeding: | ||||
| single | mm | 500 | ||
| repeatedly | mm | 9999.9 | ||
| Shortest length of residual piece in automatic mode | mm | 70 | ||
| Drive power: | ||||
| Saw motor | kW | 4 | ||
| Coolant pump | kW | 0,12 | ||
| Hydraulic motor | kW | 1,5 | ||
| Chip brush | kW | x | ||
| Overall dimensions: | ||||
| length | mm | 2670 | ||
| width | mm | 1600 | ||
| height | mm | 1800 | ||
| Net weight | kg | 2500 | ||
Description:
The model OL 421 AP is a high efficiency gantry type bandsaw cutting machine designed for straight cutting of solids, pipes and profiles of ferrous and non-ferrous metals for industrial usage and universal application.
Powerful, reliable and precisely working, the cutting machine OL 421 AP is designed for achieving of maximum productivity even at carbide tipped cutting blades application, as well as one or many shift working mode. The machine works perfectly in cutting of materials requiring higher cutting forces.
The model OL 421 AP is controlled on base of an industrial programmable controller having opportunity for setting of 99 programs containing number of the bars being cut.
The cutting speed is assured by an asynchrony electric motor and it is frequency controlled at the range of 15 ÷ 100 m/min.
The machine OL 421 AP belongs to the category of fully-automatic machines equipped with a hydraulic system, allowing automation of many working operations (material clamping in the vice, saw bow movement up and down), and a cutting force control. The machine is equipped with a system for automatic tracking both of the feeding speed and the cutting force. At the cutting feed extremely increasing the saw bow slows automatically to its full stop and smoothly increasing up to the set value after the cutting force is normalized.
The model OL 421 A? assures maximum productivity by a significantly increasing of the material usage and minimum remnant piece of 70 mm in automatic mode.
Saw bow feeding – hydraulically;
Saw bow lifting – hydraulically;
Material feeding – hydraulically;
Material clamping – hydraulically;
Saw blade tensioning – manually;
Cutting length setting – manually;
Movable band guide adjustment – automatically;
Power, wear resistance and higher accuracy;
Maximum productivity;
